Introduction
The EFLECH and INDEX beta versions are intended to be used for getting familiar
with the software. They have no limitations. You should not use this beta
code after Jun 2006. Index at level 3.5.9 has successfully passed a set of
17 test examples consisting of
- 3 cubic examples: fluorite, magnetite, Y2O3
- 2 tetragonal examples: cassiterite, zircon
- 3 hexagonal examples: corundum, quartz, zincite
- 2 orthorhombic examples: anhydrite, PbSO4
- 3 monoclinic examples: epidote, gypsum, muscovite
- 4 triclinic examples: K2Cr2O7, kyanite,
plagioclase, wollastonite
In all cases, the default values for ignore=
were in usage.
Licence Conditions
- Use the program at your own risk.
- Educational use of the program is encouraged.
- Commercial use is strictly forbidden.
- Using the beta program is not allowed after Jun 2006.
- For any questions, mailto
support@bgmn.de
- If results achieved with EFLECH are to be published, please cite the
following paper:
G. Querner, J. Bergmann, W. Blau
A method for data reduction and optimal experimental design in XPD
proceedings of the 1st European Conference on Powder Diffraction (EPDIC 1)
Mat. Sci. Forum 79-82 (1991) part1 pp. 107-112
- If results achieved with EFLECH/INDEX are to be published, please see
here for a paper appropriate for citation.
Installation instructions
Download the appropriate program files and the
data files ('bgmndata.zip'). Create a directory 'rietveld' in the root of a
volume (e.g. c:). Then unzip the program files and the data files into this
directory. Append this directory to the path. Set the environment variable
EFLECH
to the program directory:
EFLECH=c:\rietveld
Now you are ready to run EFLECH/INDEX.
It is recommended to create separate subdirectories for each analytical task
(e.g. c:\rietveld\k2cr2o7
) and to run all programs from these
subdirectories. These subdirs should contain the control file
(*.sav
), the measuring data file
(*.val
, *.rd
, *.raw
)
and the instrumental function file
(*.geq
/*.ger
).
Actual Release is 3.5.9
Download area
- Programs for Windows:
relatedwin32.zip (339237 bytes)
- Programs for OS/2 (which is the developer's system):
relatedos2.zip (292821 bytes)
- Programs for Linux (compiled on RedHat 8.0 as distributed):
relatedlinux.tar.gz
(217889 bytes)
- Additional, you need the BGMN demo packet to
be installed. Especially:
- GEOMET/MAKEGEQ for generation of peak model parameters
- OUTPUT for generating a peak list
- SHOW (PLOT1) for EFLECH result output
- Of course, you must download the BGMN data
packet too!
- Example K2Cr2O7:
The Linux example includes the binary *.geq
file for Intel
processors. It may not be used on other UNIX systems.